GE Zoneline Heat pump Unit with Corrosion Protection-9K BTU, 230V-Hospitality PTACs-AZ65H09DAC

Product Highlights

  • Cooling capacity 9,700 BTU
  • Dehumidification 2.6 pints/hour
  • Reverse heat cycle 8,100 BTU
  • Heat pump efficiency 3.7 COP
  • Indoor fan CFM (high/low) 409/300
  • Fresh air vent CFM (fully open high fan) 40
  • Corrosion resistant – Extends life of the unit in sea coast areas/corrosive environments
  • Heat & Freeze Sentinels – Keeps the room from overheating or freezing
  • Boost heat option – Provides supplemental resistance heat in heat pump mode
  • Electronic temperature limiting – Prevents expensive over-cooling or over-heating of the room
  • R-410A refrigerant
  • SMC base pan
  • SKU: AZ65H09DAC
SKU: AZ65H09DAC Categories: , Brand:


Zoneline Packaged Terminal Air Conditioners provide year-round comfort with individual heating and cooling temperature controls. Zoneline units are extremely quietand designed to fit a wide range of applications, making them the ideal choice for hotels and motels, office buildings and apartments. Standard on all models is GE’s exclusive “Superseal” system, which reduces air infiltration and increases both comfort and efficiency. All Zoneline units now use R-410A refrigerant which is compliant with 2010 US Environmental Protection Agency requirements for the phase-out of ozone-depleting compounds.

GE Zoneline PTACs and PTHPs are the most energy-efficient heating and air conditioning systems available for hotels, motels and resort facilities. GE’s thru-the-wall air conditioners are built-in and offer a better weather barrier than traditional air conditioning units. The GE Zoneline PTAC has clean lines, smooth curves and contemporary designs to complement any guest room decor. The Zoneline packaged terminal air conditioners and heat pumps were designed with your bottom line in mind and offer the most reliable solutions for lodging comfort.


Cooling BTUH (MIN)9600.0 Btu
Cooling BTUH (MAX)9700.0 Btu
Cooling EER (BTUH / Watt)12.2/12.2
CFM Indoor Fan High420
CFM Indoor Fan Low300
Dehumidification (pts./hr.)2.6
Heating – Reverse Cycle – BTUH8100/8000
Vent CFM (high fan at zero ESP)40


Sensible Heat Ratio68%
Chassis TypeSlide-In
Control TypeStandard Microcomputer
Tactile touch pad with LED Display
Corrosion TreatedYes
Discharge Grille2-position
Electronic Micro Computer ControlYes
Fan Cycle SwitchYes
Fan Motor2
Fan Speed ControlYes
Fan Speed SelectionsHi/Low Cooling
Hi/Low Fan Only
Hi/Low Heating
Filter TypeRigid Frame
Heat – CoolYes
Louver StyleReversible
Manual Vent ControlHidden
Rotary CompressorYes
Temperature LimitingElectronic 7-Step
Vent Control3-position
Venting FeaturesConcealed Manual Vent Control
Outdoor Vent Control – 3 Positions
Vent Air Filter
Zoneline Features“Sleep” Mode
“Smart Fan” Fan Cycle Control
3-Stage Heating Design
Auto Power Recovery
Automatic Emergency Heat
Automatic Indoor Frost Control
Central Desk Control Compatibility
Freeze Sentinel
Heat Pump with Resistance Heat Backup
Heat Pump with Supplemental Resistance Heat
Heat Sentinel
Power Cord (LDCI) included
Proportional – Integral ID Airflow
Quick Heat Recovery
Random Twist/Length Segment Tangential Blower
Remote Thermostat Compatibility
Reverse Cycle Defrost
Universal Heaters
Weather Protected Electrical Components
Heating SystemHeat Pump
Product TypePackaged Terminal Air Conditioners (PTAC)
Temperature Range60 – 85 F


Cooling – Amperes; F.L. – Cooling3.6/3.9
Cooling – Amperes; L.R.21.0
Cooling – Watts795/785
Heating – Reverse Cycle – Amps2.9/3.1
Heating – Reverse Cycle – COP3.7/3.7
Heating – Reverse Cycle – Watts645/630
Power Factor98
Voltage (MIN)208.0 V
Voltage (MAX)230.0 V


Parts WarrantyLimited 1-year entire appliance
Limited 5-year sealed refrigerating system
Labor WarrantyLimited 1-year entire appliance
Limited 5-year sealed refrigerating system
Warranty NotesSee written warranty for full details


Net Weight110.0 lb
Overall Depth20.8125 in
Overall Height16.0 in
Overall Width42.0 in



Additional information

Weight110 lbs
Dimensions20 × 42 × 16 in