GE Zoneline AZ65H12DAM Make Up Air & Heat Pump 12K BTU – Hospitality PTACs & ACs

Product Highlights

  • Delivers 35 CFM of continuous make up air
  • Conditions incoming air when relative humidity outdoors is above 55%
  • May reduce the need for rooftop units
  • Reverse Heat Cycle
  • Heat & Freeze Sentinels
  • Boost Heat Option
  • 11,500/11,400 BTU Cooling Capacity
  • 11.2/11.2 E.E.R.
  • 10,400/10,300 BTU (Reverse Cycle Heat)
  • Electronic Touch Controls with LED Display
  • 3.2 Dehumidification (pints/hr)
  • 449/270 CFM Indoor Fan (High/Low)
  • SKU: AZ65H12DAM
SKU: AZ65H12DAM Categories: , , Tag: Brand:


Zoneline with resistant heat make up air conditions incoming air when relative humidity outdoors is above 55% helping to create a better guest experience. Make up air can reduce the need for roof-top units and delivers 35 CFM of continuous make up air. For colder climate regions, the GE Zoneline Package Terminal Heat Pump (PTHP) provides the most efficient source of heat. The PTHP comes with a heat pump mode that offers better heating than a regular PTAC air conditioner. Once activated the heat pump works in a reverse refrigeration cycle so that cool air exits the room and warm air enters the room. The cooling mode is the exact same in both the PTAC and PTHP to provide comfort in warmer climates. Known as the industry’s quietest PTHP, GE Zoneline features a baked-on mastic barrier which covers the back of the unit for ultimate sound insulation.

GE Zoneline PTACs and PTHPs are the most energy-efficient heating and air conditioning systems available for hotels, motels, resorts, nursing homes and hospitals. GE’s through-the-wall air conditioners are built-in and offer a better weather barrier than traditional air conditioning units. GE Zoneline models have clean lines, smooth curves and contemporary designs to complement any guest room decor. The Zoneline packaged terminal air conditioners and heat pumps were designed with your bottom line in mind and offer the most reliable solutions for lodging comfort.

Make up air models are not recommended for installation within two miles of coastal areas and is strongly recommended to be installed with wall thermostats.

Product Specifics

Heating – Reverse Cycle – COP 3.7/3.7
Cooling – Watts 975/960
Cooling – Amperes; L.R 29.5
Voltage 230.0
Heating – Reverse Cycle – Heater Watts (max. connected load) 850/835
Heating – Reverse Cycle – Heater Amps 4.1/4.5
Dehumidification (pts./hr.) 3.2
Heating – Reverse Cycle – BTUH 10400/10300
Vent CFM (full open)  35
CFM Indoor Fan High  449
CFM Indoor Fan Low  270
Cooling BTUH 11600/ 11500
Cooling EER (BTUH / Watt) 11.4/11.4
Zoneline Features   Universal Heaters. Solid State Thermostat. Automatic Indoor Frost Control.
Fan Cycle Switch Yes
Heat – Cool Yes
Discharge Grille 2-position
Temperature Limiting Electronic 7-Step
Fan Motor 2
Manual Vent Control Hidden
Control Type Standard Microcomputer. Tactile touch pad with LED Display
Fan Speed Selections Hi/Low Cooling. Hi/Low Fan Only. Hi/Low Heating
Venting Features Concealed Manual Vent Control. Vent Air Filter. Outdoor Vent Control – 3 Positions
Rotary Compressor Yes
Electronic Micro Computer Control Yes
Louver Style Reversible
Corrosion Treated Yes
Vent Control 3-position
Fan Speed Control Yes
Filter Type Rigid Frame. Slide-Out
Labor Warranty Limited 1-year entire appliance. Limited 5-year sealed refrigerating system
Warranty Notes See written warranty for full details
Net Weight (lbs.) 113
Overall Width (Excludes Sleeve) 40
Overall Height 16
Overall Depth 13 3/4
Overall Height (Excludes Sleeve) 15 1/2
Overall Depth (Excludes Sleeve) 19 13/16
Overall Width 42


Additional information

Weight 113 lbs
Dimensions 13 × 42 × 16 in
BTU Rating