Hotpoint 9K BTU PTAC Heat Pump, Electric Heat Backup 230/208V, 15A – AHHS09D2XXA

Hotpoint 9K BTU PTAC Heat Pump, Electric Heat Backup 230/208V, 15A – AHHS09D2XXA
AHHS09D2XXA

Product Highlights

  • Hotpoint commercial PTAC heat pump with electric backup

  • Model AHHS09D2XXA

  • 9,000 BTU nominal cooling class

  • 9,400 BTU/h cooling at 230V

  • 9,200 BTU/h cooling at 208V

Hotpoint® 9,000 BTU PTAC Heat Pump with Electric Heat Backup, 230/208V, 15A – AHHS09D2XXA

The Hotpoint AHHS09D2XXA Packaged Terminal Air Conditioner (PTAC) Heat Pump is a commercial through-the-wall heating and cooling system designed for hotels, motels, extended-stay properties, senior living communities, and other individually conditioned spaces. Operating on 230/208V, single-phase electrical service with a 15-amp configuration, this 9,000 BTU-class unit delivers 9,400 BTU/h of cooling at 230V and 9,200 BTU/h at 208V, alongside 8,400/8,100 BTU/h of reverse-cycle heat-pump heating. A 2.5 kW electric resistance backup heater provides supplemental heating when heat-pump operation is insufficient or unavailable.

Unlike PTACs that depend exclusively on electric resistance heating, the AHHS09D2XXA uses a fixed-speed rotary compressor and reverse-cycle refrigeration system to deliver primary heating under suitable outdoor conditions. With published cooling efficiency ratings of 11.3 EER at 230V and 11.4 EER at 208V, together with a 3.3 coefficient of performance (COP) for heat-pump heating, the system offers an efficient alternative to conventional electric-heat-only equipment. Automatic emergency heat supports the transition to resistance heating when outdoor conditions require it.

The AHHS09D2XXA incorporates hospitality-focused features, including two selectable fan speeds, four temperature-limiting options, a streamlined coverless electronic control panel, and an automatically dimming LED display. Additional functions include Freeze Sentinel protection, automatic indoor frost control, overheat protection, automatic power recovery, self-diagnostics, SmartFan fan cycling, and constant-fan operation. These features support guest comfort while helping hotel maintenance teams manage equipment efficiently across multiple rooms.

Designed for straightforward installation and replacement, the unit features a slide-in chassis measuring approximately 42.4 inches wide, 16 inches high, and 20.9 inches deep. Its factory-attached LCDI power cord supports installation with the appropriate 15A electrical receptacle and branch circuit. Compatible wall sleeves, exterior grilles, subbases, replacement filters, and remote thermostat accessories are available separately, making the model suitable for new construction and properly verified PTAC replacement projects.

Using R-32 refrigerant, the Hotpoint AHHS09D2XXA combines dependable room cooling, efficient heat-pump heating, and electric resistance backup in a familiar commercial PTAC format. Its slinger-ring condensate removal system, removable filters, accessible electronic controls, and diagnostic capabilities help simplify routine maintenance. Backed by Hotpoint and GE Appliances service support, this model offers a practical solution for hospitality properties seeking 9,000 BTU-class climate control with a 15A electrical configuration.

Product Highlights

  • 8,400 BTU/h heat-pump heating at 230V

  • 8,100 BTU/h heat-pump heating at 208V

  • 230/208V electrical compatibility

  • 15A electrical configuration

  • Single-phase, 60Hz operation

  • 2.5 kW electric resistance backup heating

  • Reverse-cycle heat-pump heating

  • Automatic emergency heat

  • 3.3/3.3 heat-pump COP

  • 11.3/11.4 cooling EER

  • Fixed-speed rotary compressor

  • 830W cooling power at 230V

  • 805W cooling power at 208V, Series A Product Guide

  • 745W heat-pump heating power at 230V

  • 715W heat-pump heating power at 208V

  • 500 CFM high-speed airflow

  • 420 CFM low-speed airflow

  • Two cooling fan speeds

  • Two heating fan speeds

  • Two fan-only speed selections

  • Variable-speed DC indoor fan motor

  • 1.86 pints/hour dehumidification

  • 78.5% sensible heat ratio

  • R-32 refrigerant

  • 14.82 oz. refrigerant charge

  • Published heat-pump operation down to 32°F

  • Four selectable temperature-limiting options

  • 62–80°F temperature setting range

  • Coverless electronic control panel

  • Automatically dimming LED display

  • Automatic power recovery

  • Freeze Sentinel low-temperature protection

  • Automatic indoor frost control

  • Overheat protection

  • Self-diagnostic fault-code display

  • Constant-fan function

  • SmartFan fan-cycle control

  • Slinger-ring condensate removal

  • Concealed manual ventilation control

  • Optional RAKVENTH fresh-air kit

  • Compatible 24V remote wall thermostat support with accessory kit

  • Factory-attached LCDI power cord

  • 15A NEMA 6-15 plug configuration

  • Slide-in PTAC chassis

  • Through-the-wall installation

  • Compatible wall sleeve sold separately

  • Compatible exterior grille sold separately

  • Removable air filters

  • 42.4-inch overall width

  • 16-inch overall height

  • 20.9-inch overall depth

  • 86-lb. net weight

  • 96.6-lb. approximate shipping weight

  • White exterior finish

  • Limited one-year entire-appliance labor warranty

  • Limited two-year entire-appliance parts warranty

  • Limited five-year sealed refrigeration-system coverage

  • Backed by GE Appliances service support

  • Suitable for hotels, motels, extended-stay properties, senior living, and commercial lodging

You May Also Like

Hotpoint PTAC 12K BTU Heat Pump Unit with Electric Heat Backup 265V 20AMP - AH11H12E3B - Image 1
View Details

Hotpoint PTAC 12K BTU Heat Pump, Electric Heat Backup 265V 20 Amp – AH11H12E3B

Please log in to add this product to your wishlist

Request a Quote

A member of our team will reach out to you within the next 24 hours to discuss your quote.

Hotpoint 9K BTU PTAC Heat Pump, Electric Heat Backup 230/208V, 15A – AHHS09D2XXA