Amana 9K BTU Standard Heat Pump PTHP with 3.7 kW Electric Heat – PTH094J35AXXX

Amana 9K BTU Standard Heat Pump PTHP with 3.7 kW Electric Heat – PTH094J35AXXX
PTH094J35AXXX

Product Highlights

  • 9,000 BTU/h nominal cooling capacity

  • Commercial packaged terminal heat pump (PTHP)

  • 8,200 BTU/h reverse-cycle heat pump heating capacity

  • 3.7 kW supplemental electric resistance heat

  • Approximately 12,600 BTU/h nominal electric heating capacity

Brand standard at:
Hilton
Hyatt
Marriott
Wyndham
Courtyard by Marriott

Amana 9K BTU Standard Heat Pump PTHP – PTH094J35AXXX


The Amana PTH094J35AXXX 9,000 BTU Packaged Terminal Heat Pump (PTHP) is a commercial-grade heating and cooling solution designed for hotels, resorts, extended-stay properties, senior living communities, multifamily housing, student housing, and other hospitality and commercial environments. Combining 9,000 BTU/h of cooling capacity, 8,200 BTU/h of reverse-cycle heat pump heating, and 3.7 kW supplemental electric heat, this 265V unit provides year-round guestroom climate control from a single through-the-wall system.

As part of Amana’s current J-Series platform, the PTH094J35AXXX uses R-32 refrigerant and achieves a 12.4 EER, providing an efficient option for properties replacing older PTAC/PTHP equipment or specifying climate-control systems for new hospitality projects. Heat pump operation allows the unit to provide efficient reverse-cycle heating when conditions permit, while the integrated electric resistance heater provides supplemental heating capability when required.

The unit also incorporates integrated Bluetooth and RF connectivity, enabling configuration and diagnostics through compatible Amana technologies. Amana’s mobile-app functionality can help technicians reduce unit setup and configuration time while providing access to advanced troubleshooting and diagnostic capabilities. Integrated connectivity with the Eden™ Energy Management System also gives hospitality operators a pathway toward more centralized guestroom energy management.

Guestroom acoustics are another important consideration in the J-Series design. Amana uses improved materials and construction intended to reduce the transmission of exterior and operating noise into occupied spaces. This is particularly valuable for hospitality applications, where HVAC equipment operates in close proximity to the sleeping area and quieter performance can contribute directly to guest comfort.

The PTH094J35AXXX operates on 265V power with a 20-amp maximum overcurrent protection configuration and NEMA 7-20P power cord. Its standardized 42-inch-wide chassis is designed around the familiar PTAC form factor used throughout the hospitality industry. A compatible wall sleeve and exterior grille are required and are sold separately for new installations.

Product Highlights

  • 265V, 60Hz electrical configuration

  • 20-amp maximum overcurrent protection

  • NEMA 7-20P power cord

  • 12.4 EER cooling efficiency

  • Heat pump COP of 3.5

  • Uses R-32 refrigerant

  • Standard-efficiency Amana J-Series platform

  • Integrated Bluetooth connectivity

  • Integrated RF connectivity

  • Compatible with the Amana mobile-app ecosystem for unit setup and diagnostics

  • Advanced troubleshooting and diagnostic capabilities

  • Eden™ Energy Management System ready

  • Supports integrated wired and wireless thermostat connectivity

  • Improved design helps reduce operating and exterior noise transmission

  • Commercial design engineered for hospitality and multi-room applications

  • Standard 42-inch PTAC chassis width

  • Through-the-wall installation helps conserve usable guestroom floor space

  • Heat pump operation provides efficient heating under appropriate operating conditions

  • Supplemental electric heat supports heating when heat-pump operation alone is insufficient

  • Wall sleeve and exterior grille required for new installations and sold separately

  • Ideal for hotels, resorts, motels, extended-stay properties, senior living, multifamily and student housing

Amana’s official documentation confirms the PTH094J platform as a 9,000 BTU/h, 265V, R-32 heat-pump model with a 12.4 EER, 8,200 BTU/h reverse-cycle heating capacity and 3.5 COP.

You May Also Like

Amana DigiDoor Occupancy Sensor for Amana PTACs – DD01E - Image 1
View Details

Amana DigiDoor Occupancy Sensor for Amana PTACs – DD01E

Please log in to add this product to your wishlist

Request a Quote

A member of our team will reach out to you within the next 24 hours to discuss your quote.